Walter--
I bet you could make one yourself. That's one of the parts of guitar building I find truly enjoyable.
Unlike routing the binding channels.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Special pin spaced bridges http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2530 |
Page 1 of 1 |
| Author: | WalterK [ Wed Jul 20, 2005 8:59 am ] |
| Post subject: | |
Hi Folks, I am looking for an Ebony bridge, similar to Martins, with a 2 5/16 pin spacing. Is Martin the only place I can buy it??? Thanks! Walter |
|
| Author: | RussellR [ Wed Jul 20, 2005 9:03 am ] |
| Post subject: | |
Hi Walter John Hall at blues creek can probably make you one. |
|
| Author: | Steve Kinnaird [ Wed Jul 20, 2005 1:47 pm ] |
| Post subject: | |
Walter-- I bet you could make one yourself. That's one of the parts of guitar building I find truly enjoyable. Unlike routing the binding channels.
|
|
| Author: | crazymanmichael [ Wed Jul 20, 2005 2:13 pm ] |
| Post subject: | |
i don't know of anyone else advertising to supply them. but steve is right; they are easy and enjoyable to make, buying them in seems a waste. |
|
| Author: | tippie53 [ Wed Jul 20, 2005 2:57 pm ] |
| Post subject: | |
I can make you one. I may even have one in stock. $12.95 |
|
| Author: | KiwiCraig [ Thu Jul 21, 2005 11:59 am ] |
| Post subject: | |
G'day Walter, I'm sure you could do this yourself, and really enjoy the work . More importantly, you could be proud of your own work! That's what we are all about aren't we? Too many builders are farming out work ."Their" guitars are actually being made by several people entering the folds of production guitar makers. Not making your own would probably be a sin. (Now that is a joke Walter) 
All the Best, KiwiCraig |
|
| Author: | KiwiCraig [ Thu Jul 21, 2005 12:04 pm ] |
| Post subject: | |
Incidently Walter, I think Ebony isn't a good choice for bridges as it has been found to be tonally inferior compared to rosewoods etc. KiwiCraig |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|